Midstream & More

Starting Up a Heater with Tulsa Heaters Midstream

Written by Justin Forth | Jul 25, 2024 7:03:58 PM

Starting up a heater in the oil and gas industry is a task that demands precision and expertise. Whether you are an experienced professional or new to the industry, Doyle Bishop provides to understanding of the intricacies of energy operations, this guide will provide a comprehensive overview of the startup process for heaters used in midstream operations by Tulsa Heaters.

Overview of the Startup Process

The startup of a heater involves several key steps, each crucial to ensuring safe and efficient operation. Here’s a detailed breakdown of the process:

Before igniting the heater, it’s essential to purge the system. This is done using the combustion air blower.

Step 1: Purging the System

Combustion Air Blower Activation:

  • Activate the combustion air blower to start delivering air to the burner.
  • Ensure the blower is functioning correctly and delivering the appropriate amount of air.
Purge Process:
  • The purpose of purging is to remove any residual gases from the system to prevent potential hazards.
  • Allow the blower to purge the system for a predetermined period, typically specified in the heater’s operational guidelines.

Once the system is purged, the next step is to ignite the pilot gas.

 

Step 2: Igniting the Pilot Gas

Pilot Gas Delivery:
  • Open the pilot gas valve to begin delivering fuel to the pilot burner.
  • Ensure the pilot gas pressure is within the specified range for safe ignition.

UV Scanner Activation:

  • The UV (ultraviolet) scanner is a critical component that detects the presence of a flame.
  • Monitor the UV scanner to confirm that it successfully detects the flame once the pilot gas ignites.

After confirming the presence of a pilot flame, it is safe to ignite the main gas.

 

Step 3: Igniting the Main Gas

Main Gas Activation:
  • Open the main gas valve to start delivering fuel to the main burner.
  • Gradually increase the main gas flow rate to the prescribed level for optimal combustion.
Monitoring and Adjustments:
  • Continuously monitor the flame using the UV scanner and other instrumentation.
  • Make any necessary adjustments to the gas flow rates and combustion air to maintain stable and efficient operation.

Contact Tulsa Heaters Midstream, Tulsa, Oklahoma 

Starting up a heater in the midstream sector requires meticulous attention to detail and adherence to safety protocols. By following the outlined steps—purging the system, igniting the pilot gas, and then the main gas—you can ensure a safe and efficient startup process.

For those new to the process or looking to deepen their understanding, Tulsa Heaters Midstream offers expert guidance and support. Whether you're an oil and gas professional or an energy sector investor, having a thorough grasp of these procedures can significantly impact operational success and safety.

For further assistance or to learn more about our services, feel free to contact us. 

Email: info@tulsaheatersmidstream.com

Phone: 918.392.8000